ACMA TCA1
National · Compliance
Form title
Form title
Form description and authority line
Form description and authority line
Form title
Form title
Form description and authority line
Form description and authority line
Start form
Start form
Finish your QLD electrical certificate on site
Complete testing and compliance or testing and safety details in one guided form, then download the WorkSafe Queensland PDF layout.
Give the customer the certificate before you pack up, with fewer gaps to chase later.
- Downloads as the V6.11 PDF
- Installation or equipment certificate in one form
- Gaps flagged before you download
9:41
QLD CoTC
WorkSafe Queensland
Import from job
Customer
Business
Saved detailLicence no.-
Tests & results
Polarity correct-
Earth continuity-
RCD trip time-
Fix before download
1 required field incomplete
All changes saved
Download PDFAttached to job
Saved details prefilled
Business and licence
AI assistant
Helps you fill the form
Testing certificates get messy after the job
The longer the cert waits, the more likely details end up copied from memory.
Customer and licence details repeated
Contractor licence, name, and phone should carry over from your last certificate.
Wrong certificate type ticked
Installations and equipment use different certificate types under the ES Regulation. Easy to mix up on a flat PDF.
Desktop PDF tools on a phone
Generic editors are awkward when you just want to fill, download, and hand it over on site.
Give the customer the certificate before you pack up, with fewer gaps to chase later.
From testing done to cert handed over
Three steps that keep the certificate with the job.
Demo: pick a template from the catalog, fill the form on site using shortcuts like job import and address search, then download the finished PDF.
Resume a draft or pick a fresh template from the library.
Tradie Forms vs a flat PDF
Same QLD CoTC paperwork goal, but built to finish at the job instead of fighting a PDF editor.
Need
Tradie Forms
Flat PDF
Fill on site
Work through mobile-friendly sections while the job is fresh.
Pinch, zoom, and type into small PDF fields.
Repeat details
Reuse saved details where supported and start the next job faster.
Re-enter business, licence, customer, and site details.
Check before export
Required fields, signatures and form-specific rules are validated before export.
Gaps are easy to miss until someone reviews the PDF later.
Finished output
A completed PDF on the expected template layout, ready to review.
A manually edited PDF that can be hard to keep organised.
About this form
The QLD Certificate of Testing and Compliance (CoTC) is the WorkSafe Queensland form for certifying electrical installation or equipment testing. Tradie Forms maps to the V6.11-2023 PDF layout.
- Who has to complete the QLD CoTC?
- Electrical contractors and licensed electricians who test and certify installation or equipment work in Queensland.
- When is it required?
- After you test electrical installation work (testing and compliance) or electrical equipment (testing and safety) and need to give the customer a certificate.
- Where does the completed form go?
- Hand the completed PDF to your customer and keep a copy for your records. Tradie Forms does not lodge this certificate with WorkSafe Queensland.
- Can I fill it on my phone?
- Yes. Tradie Forms guides you through each section on mobile and exports the official PDF layout when you are ready to complete.
- Will this PDF be accepted?
- Tradie Forms exports onto the official PDF layout where supported. Always preview and check the completed PDF before sending, lodging, or handing it over. Tradie Forms does not lodge or certify the form for you.
- Tradie Forms is not affiliated with WorkSafe Queensland.
Template version V6.11-2023WorkSafe Queensland certificate guidance
What you fill in
Three guided groups that follow the certificate.
Certificate and Customer
Certificate type and who the work was performed for.
Work and Contractor
What was tested and contractor licence details.
Notice Date
When the certificate was given to the customer.
What gets checked before export
Tradie Forms checks these requirements against the WorkSafe Queensland template before the PDF is ready to complete.
Work and test details
The technical details that prove what was completed or checked.
Customer name, address, work tested, test date, and licence number are required.
Keep a copy for your records for five years as required by WorkSafe Queensland.
Final export review
Anything else that should be checked before downloading the PDF.
Select a certificate type before download.
Frequently asked questions
Guides for QLD CoTC
Compliance and workflow articles matched to this form.
Related forms
Nearby templates for the same state, trade, or paperwork type.
Keep exploring
Open the guide, browse the catalogue, or send a PDF we can map.
Start the QLD electrical certificate
Open the certificate, fill it while the work is fresh, and download the PDF for the customer.
- No credit card required
- 3 free PDF downloads a month