Form guides
Equipment
Equipment installed and work performed on the NSW CCEW
Tick what you actually installed or changed on this job. Only fill ratings and quantities for categories you worked on.
Equipment installation tracking
For each equipment type, check the installation box to indicate work was performed. This reveals additional fields for detailed specifications.
Required information
When equipment is marked as installed, provide Rating and Number Installed for compliance tracking.
Additional details
Use Particulars field for specific equipment details, models, or special conditions.
Equipment types
Switchboard
Main distribution boards, sub-boards, and meter panels. Include total amp rating, number of ways, and specify type (e.g., "TPN 250A Main Board", "Single Phase Sub-Board").
Circuits
New circuit installations and modifications. Document circuit protection ratings, types, and note special circuits (RCD protected, RCBO, etc.).
Lighting systems
All fixed lighting installations including LED downlights, fluorescent fittings, and exterior lighting. Include wattage and control methods (switches, dimmers, sensors).
Power outlets
General purpose outlets and dedicated circuits including standard GPOs, 15A outlets, and three-phase outlets. Note special requirements (weather protection, RCD protection).
Fixed appliances
Hardwired electrical equipment such as hot water systems, air conditioning, and pool equipment. Include power ratings and connection types.
Generation equipment
Solar PV, wind, and micro-hydro systems. Include inverter ratings, AC output capacity, and specify grid connection or off-grid configuration.
Energy storage
Battery systems and backup power installations. Include battery capacity (kWh), inverter ratings, and integration with existing or new generation systems.
Equipment specification details
For each installed equipment type, provide:
Rating information
- Electrical rating: Voltage, current, and power specifications
- Protection rating: Circuit breaker or fuse sizes
- Environmental rating: IP ratings for outdoor installations
Installation quantities
- Number Installed: Total units or points installed
Particulars and specifications
- Manufacturer and model: For critical equipment identification
- Special features: Smart controls, energy efficiency ratings
- Environmental conditions: Outdoor, wet area, hazardous location specifications
Include model numbers and specific ratings for major equipment like switchboards, inverters, and large appliances to assist with future maintenance and compliance verification.
If you are unsure how to describe complex switchboard work, align wording with your job sheet and AS/NZS documentation.
Meters section
Meter installation and removal table.