Loading documentation page
Form guides
Equipment fields in an existing draft from the retired Tradie Forms NSW CCEW
Tick what you actually installed or changed on this job. Only fill ratings and quantities for categories you worked on.
For each equipment type, check the installation box to indicate work was performed. This reveals additional fields for detailed specifications.
When equipment is marked as installed, provide Rating and Number Installed for compliance tracking.
Use Particulars field for specific equipment details, models, or special conditions.
Main distribution boards, sub-boards, and meter panels. Include total amp rating, number of ways, and specify type (e.g., "TPN 250A Main Board", "Single Phase Sub-Board").
New circuit installations and modifications. Document circuit protection ratings, types, and note special circuits (RCD protected, RCBO, etc.).
All fixed lighting installations including LED downlights, fluorescent fittings, and exterior lighting. Include wattage and control methods (switches, dimmers, sensors).
General purpose outlets and dedicated circuits including standard GPOs, 15A outlets, and three-phase outlets. Note special requirements (weather protection, RCD protection).
Hardwired electrical equipment such as hot water systems, air conditioning, and pool equipment. Include power ratings and connection types.
Solar PV, wind, and micro-hydro systems. Include inverter ratings, AC output capacity, and specify grid connection or off-grid configuration.
Battery systems and backup power installations. Include battery capacity (kWh), inverter ratings, and integration with existing or new generation systems.
For each installed equipment type, provide:
Meter installation and removal table.