# QLD Form 6 remote area compliance notice (https://tradieforms.com.au/resources/qld-form-6-remote-area-compliance-notice-guide)
How the QLD Form 6 remote area compliance notice works, who signs it, and the 10 business day deadline to give it to council. Fill it on site, download the PDF. | State: QLD | Trade: Plumbing | Template: qld-form-6-remote-area-compliance-notice
> **Tradie Forms:** finish the remote area compliance notice on site and give council a clean Form 6 within the deadline. These guides help QLD plumbers and drainers keep records straight; the same on-site habits apply as we add more Australian trade templates.
You have finished the permit work on a job a long way from the local government office. Nobody is coming out to inspect it, because the council has declared the area remote. That does not mean the job closes itself. In Queensland the way you certify remote area permit work is the Form 6 remote area compliance notice, and it has to reach the local government within a set window after the plumbing or drainage is operational. Get the land, permit, work, and responsible person details onto the notice correctly and council can issue the final inspection certificate. Miss the deadline or a field and the job stays open.
This guide covers what the Form 6 is for, who can sign it, the timeframes that apply, and how to complete the notice so council accepts it and closes out the permit.
* Form 6 is the remote area compliance notice under section 72(2) of the Plumbing and Drainage Regulation 2019
* The responsible person must give it to the local government within 10 business days of the work becoming operational and fit for use
* A suitably qualified person can be authorised to prepare and give the notice on the responsible person's behalf
* Once council accepts the notice, it issues the final inspection certificate within 2 business days
If you are closing out a remote area permit today, open the guided [Queensland Form 6 remote area compliance notice](/forms/qld-form-6-remote-area-compliance-notice). Browse other [QLD plumbing forms](/qld/plumbing), or if the job involved testing or commissioning, the [QLD Form 5 testing or commissioning report](/forms/qld-form-5-testing) is the record that sits alongside it.
## What the Form 6 is for [#what-the-form-6-is-for]
Most permit work in Queensland gets inspected on site at set stages. In areas a long way from the local government office, sending an inspector to every job is not practical. To deal with that, smaller regional local governments listed in the Plumbing and Drainage Regulation 2019 can declare remote areas where permit work does not require an on-site inspection because of the distance involved. The local government still has to be satisfied the arrangement is not likely to adversely affect public health, safety, or the environment, and it publicises the declaration.
The trade-off is that the compliance is certified on paper rather than checked in person. When all the eligible work authorised under the permit for the premises has been carried out, the responsible person gives the local government a notice in the approved form stating that the work is compliant and the plumbing or drainage is operational and fit for use. That approved form is the Form 6.
So the Form 6 does the job an inspection would have done on a normal permit. It is the record that lets the local government accept the work and issue the final inspection certificate without an inspector standing at the site.
## Who is the responsible person [#who-is-the-responsible-person]
The Form 6 is not a form just anyone on the crew can sign. The person who gives the notice is the responsible person for the work. Under the plumbing and drainage framework that is the licensed person who performs the work, directs its performance, or supervises it. It is the person who can genuinely stand behind the installation, not the office.
The regulation does allow one bit of flexibility. The responsible person may authorise a suitably qualified person to prepare and give the remote area compliance notice on their behalf. This is why the Form 6 has room for both a responsible person and a qualified person. If the notice is being prepared by someone acting for the responsible person, both sets of details go on the form so it is clear who did the work and who lodged the notice for them.
The distinction that catches people out is between doing the work and being the person who certifies it. If your name goes in the responsible person block, the certification that the work is compliant, operational, and fit for use is yours. Make sure that is a statement you can back up before you sign.
## The information the notice collects [#the-information-the-notice-collects]
The Form 6 follows the shape of the job. Working through it in order keeps each detail tied to the right permit and premises.
**Description of the land.** The notice has to identify all the land that is the subject of the compliance notice. Get the property description right, because this is what lets the local government match the notice to the permit and the premises it covers.
**Permit details.** The permit number and the date the permit was issued. These tie the notice back to the specific permit the eligible work was authorised under.
**Description of the work.** A brief description of the plumbing or drainage work that has been performed. This tells council what the notice is actually certifying, so it should describe what was installed, not the quote title.
**Date the work was completed.** The completion date frames the notice. It matters because the clock on the deadline runs from when the plumbing or drainage became operational and fit for use.
After those come the responsible person and, where used, the qualified person details, then the declaration. Keeping these in order means the certification at the end is sitting on top of a complete record rather than a form with gaps.
## The 10 business day deadline [#the-10-business-day-deadline]
The timing on a Form 6 is the part that trips people up, because it is easy to treat a remote job as finished the moment you pack the ute. The regulation is specific. The responsible person must give the local government the remote area compliance notice within 10 business days after the plumbing or drainage resulting from, or affected by, the work has become operational and fit for use.
That is a real obligation, not a courtesy. Failing to give the notice as required carries a maximum penalty of 20 penalty units for the responsible person. On a remote job the paperwork is the only thing telling council the work is done and compliant, so a notice that never arrives leaves the permit hanging open and exposes you to that penalty.
The practical fix is to treat the notice as part of finishing the work, not something you get to back at base. Complete it while the land description, permit number, and work details are in front of you, and give it to the local government inside the window rather than letting it sit in a folder.
## What council does with the notice [#what-council-does-with-the-notice]
Once you give the local government a completed Form 6, two more timeframes kick in on their side.
The local government has 5 business days after receiving the notice to make its decision on it. If it accepts the notice, it must issue the final inspection certificate for the plumbing or drainage work within 2 business days of accepting it. That final inspection certificate is the document that formally closes out the permit work, the same certificate a physical inspection would have led to on a non-remote job.
Because council is working to those timeframes off your notice, a Form 6 that is incomplete or does not match the permit slows the whole thing down. A clean notice that identifies the land, cites the right permit, and describes the work is what lets council make its decision and issue the certificate without coming back to you for more detail.
## Common remote area compliance notice mistakes [#common-remote-area-compliance-notice-mistakes]
These are the ones that turn a finished job into a chase for the certificate.
**Missing the 10 business day window.** The deadline runs from when the work became operational and fit for use, not from when you next do paperwork. Give the notice inside the window.
**Wrong or missing permit details.** If the permit number or issue date is wrong, council cannot tie the notice to the permit. Copy them from the permit, do not work from memory.
**Land description that does not cover all the premises.** The notice has to identify all the land it relates to. A partial description leaves council unable to match it cleanly.
**The wrong person in the responsible person block.** The responsible person is the licensed person who performed, directed, or supervised the work. If a qualified person prepared the notice for them, both sets of details belong on the form.
Most of these come back to the same habit. The notice is written up away from the job, days later, from memory. The fix is to complete it on site while the permit, the land, and the work are in front of you.
## How Tradie Forms helps [#how-tradie-forms-helps]
Tradie Forms turns the Form 6 into guided sections that follow the order of the official notice. You enter the land description, permit number and issue date, the description of work, and the completion date, then the responsible person and, where one is acting on their behalf, the qualified person details.
Your licence and business details are saved and reused, so the responsible person block is not retyped on every job. The form flags missing fields before you download, which is what catches the blank permit number or empty completion date before council does. You preview the entries mapped onto the official Form 6 PDF layout, then download the finished notice to give the local government and keep with the job.
Tradie Forms maps your entries onto the official layout. The licensed responsible person still checks the work, the details, and the exported PDF before it goes to the local government, and remains responsible for the certification.
Start the [Queensland Form 6 remote area compliance notice](/forms/qld-form-6-remote-area-compliance-notice) on site, or browse more [QLD plumbing forms](/qld/plumbing) for the rest of your Queensland permit paperwork.
## Official references [#official-references]
Check the [Form 6 remote area compliance notice PDF](https://www.hpw.qld.gov.au/__data/assets/pdf_file/0017/3770/form6plumbingdrainageregulation2019.pdf) for the current approved form, [Changes to plumbing processes by local government](https://www.business.qld.gov.au/industries/building-property-development/building-construction/plumbing-drainage/changes-local-government) for how remote areas and the notice work, the [plumbing and drainage forms and templates page](https://www.business.qld.gov.au/industries/building-property-development/building-construction/plumbing-drainage/forms-templates) for the current form, and the [Plumbing and Drainage Regulation 2019](https://www.legislation.qld.gov.au/view/html/inforce/current/sl-2019-0042) for section 72 and the timeframes. Local government processes vary, so confirm the lodgement method and that you are the responsible person before you give the notice.