# NSW WHS Form 10: recording an incident or injury on site (https://tradieforms.com.au/resources/nsw-whs-form-10-incident-injury-report-guide)

How to complete the HISSP Form 10 incident and injury report: what to capture while it is fresh, how to write facts rather than blame, and what happens next. | State: NSW | Trade: Building | Template: nsw-safework-whs-10-incident-injury-report
Author: Jack Howitt
Published: 2026-11-12
Reviewed: 2026-10-22

Nobody opens the incident report form on a good day. By the time Form 10 comes out, something has already gone wrong and the priority is people, not paperwork.

That order is correct and it is also why the record so often ends up thin. The form gets completed hours later, from memory, by someone who spent the intervening time dealing with the actual problem. This guide covers what to capture while it is still fresh, and how to write it so the record is useful rather than defensive.

**Key takeaways**

- People and the scene come first, the form comes after the immediate response
- Notifying the regulator of a notifiable incident is a separate duty from this record
- Write what happened, not who is at fault
- A near miss recorded is a control fixed before the next one

Complete it in the [NSW WHS Form 10 incident and injury report](https://tradieforms.com.au/forms/nsw-safework-whs-10-incident-injury-report). For the hazards that should have been identified beforehand, see the [Form 04 site-specific risk assessment guide](https://tradieforms.com.au/resources/nsw-whs-form-04-site-specific-risk-assessment-guide), and for the pack as a whole, the [HISSP site pack guide](https://tradieforms.com.au/resources/nsw-whs-site-pack-swms-risk-assessment-toolbox). Browse [NSW building forms](https://tradieforms.com.au/nsw/building).

## First, before the form [#first-before-the-form]

The order on the day is people, scene, notification, then record.

Make sure anyone injured is being looked after and that the hazard is not still live for someone else. Then consider whether the scene needs to be preserved. For serious incidents there are circumstances where the site must not be disturbed beyond what is needed to help someone or make the area safe, and moving things first removes evidence nobody can recover afterwards.

**Notification is a separate duty.** Where an incident is notifiable, the regulator must be told through its own process, and completing an internal report does not discharge that. The thresholds and timing are set out by the regulator and they change, so check the current requirements with SafeWork NSW for the incident in front of you rather than working from what someone remembers.

Only once those are handled does the form matter.

## Capture it while it is fresh [#capture-it-while-it-is-fresh]

Detail degrades faster than people expect. Within a day, times become approximate and sequences reorder themselves.

Get the basics down as soon as the immediate response is finished, even in rough form: the time, who was present, what they were doing, what the conditions were, and what happened in what order. Photographs of the scene and the conditions are worth taking before anything is tidied up.

Talk to the people involved and any witnesses separately and early. Accounts converge once people have discussed it with each other, which feels like corroboration and is actually contamination.

## Write facts, not fault [#write-facts-not-fault]

The most common problem with incident reports is that they are written defensively, which makes them useless for the thing they exist to do.

An account that concludes someone was careless stops the investigation at the person and never reaches the condition that let it happen. That is comfortable and it guarantees the same incident is available to happen again to somebody else.

Describe what happened.

**What happened**

- **A fact** - The worker stepped back from the saw bench onto a length of offcut timber, lost balance, and fell against the stack (Describes the sequence, so a control can be aimed at it.)
- **A conclusion** - The worker was not paying attention (Blames a person, and gives you nothing to control.)

Keep speculation out of it, or label it clearly as such. A report mixing observation with theory is difficult for anyone to rely on later, including you.

## What the record needs [#what-the-record-needs]

The form captures the event, the people, the outcome, and the response.

**When and where**, specifically. Time and the exact location on site, not just the address. On a multi-level or multi-lot job the location is often the most important detail.

**Who was involved**, including witnesses. Names and roles, and whether they were employees, subcontractors, or visitors, since that affects who else needs to be told.

**What happened**, in sequence. The plain narrative, written as described above.

**The injury or damage**, factually. What was hurt or damaged and what treatment was given. Medical judgement is not yours to record, so describe what was done rather than diagnosing.

**Conditions at the time.** Weather, lighting, ground conditions, what else was happening on site. These are the fields that most often explain the event and most often get skipped.

**The immediate response.** What was done to make the area safe, who was notified, and when.

**Who completed the report**, and when. An account with no author is difficult to follow up.

## Near misses are worth the paperwork [#near-misses-are-worth-the-paperwork]

A near miss is the same sequence of events with a better outcome, and it is the cheapest safety information available.

Businesses that record them get to fix the control before it costs someone. Businesses that only record injuries are waiting for the injury before they learn anything, which is an expensive way to run a system.

The barrier is usually cultural rather than administrative. If reporting a near miss produces an interrogation, nobody reports the second one. If it produces a fixed control and a mention at the next toolbox talk, people start bringing them to you.

## What happens after the report [#what-happens-after-the-report]

The report is the beginning of the response, not the end of it.

Whatever condition allowed the incident should end up back in the [site risk assessment](https://tradieforms.com.au/resources/nsw-whs-form-04-site-specific-risk-assessment-guide) with a control against it, and the change should be covered at the next [toolbox talk](https://tradieforms.com.au/resources/nsw-whs-form-06-toolbox-talk-record-guide). A pack where an incident is recorded and neither of the other documents ever changes shows a system that records events without learning from them.

Keep the report with the rest of the site file under one job reference, along with the photographs and any correspondence. Where an insurer, the principal contractor, or the regulator asks about it later, the report and its supporting material want to be together.

Do not edit the original account after the fact. Where something needs correcting or adding, do it as a dated addition that says what changed and why, and keep the original.

## What if the person involved is a subcontractor? [#what-if-the-person-involved-is-a-subcontractor]

Residential sites run on subcontractors, and incidents involving them raise the question of whose report this is.

The practical answer is usually both. The subcontractor's own business has an obligation to its worker and its own records to keep. The principal contractor has duties for the site as a whole. Two reports covering the same event from two perspectives is normal and is better than each assuming the other handled it.

What causes trouble is the gap: everyone assumes someone else reported it, and nothing exists a month later. Agree who is doing what on the day rather than afterwards.

Where the injured person works for someone else, be careful about recording personal or medical detail beyond what the form asks for. Note what treatment was given and by whom; leave the diagnosis to the people qualified to make one.

## Reviewing the control, not the person [#reviewing-the-control-not-the-person]

The review after an incident is where the value is, and it is the step most often skipped once the immediate response is over.

The question worth asking is why the condition existed, not why the person did what they did. An offcut on the floor behind a saw bench is a housekeeping system that was not working. A missing edge protection panel is a check that did not happen. Both are fixable. "Be more careful" is not a control and cannot be verified.

Work back a couple of steps. If the answer to the first why is a person, ask why again until it reaches something you can change: a sequence, a check, a piece of equipment, a handover between trades.

Then close the loop by putting the change somewhere it will be seen, which on a HISSP site means the risk assessment and the next toolbox talk.

## Where the form helps [#where-the-form-helps]

The [NSW WHS Form 10](https://tradieforms.com.au/forms/nsw-safework-whs-10-incident-injury-report) follows the pack layout, with separate entries for the event, people, injury, conditions, and response. Check each entry before download.

Check the incident details are complete, preview the entries on the official layout, then download the finished PDF for the site file.

Tradie Forms maps your entries onto that layout. The PCBU remains responsible for the response on the day, for meeting any regulator notification duty that applies, and for checking the downloaded PDF before it is relied on.

## Official references [#official-references]

Check the [SafeWork NSW Housing Industry Site Safety Pack](https://www.safework.nsw.gov.au/your-industry/construction/house-construction/housing-industry-site-safety-pack) for the current forms and [SafeWork NSW construction work](https://www.safework.nsw.gov.au/your-industry/construction/construction) for construction duties, including the current incident notification requirements and how to notify. The [model Code of Practice on managing WHS risks](https://www.safeworkaustralia.gov.au/doc/model-code-practice-how-manage-work-health-and-safety-risks) and [Safe Work Australia on identifying, assessing and controlling hazards](https://www.safeworkaustralia.gov.au/safety-topic/managing-health-and-safety/identify-assess-and-control-hazards) cover the review that should follow an incident. Notification duties differ by state and change over time, so confirm the current requirements with your regulator rather than relying on this guide.

## Frequently asked questions

### What is HISSP Form 10?

Form 10 is the incident and injury report in the SafeWork NSW Housing Industry Site Safety Pack. It records what happened, who was involved, what injury or damage resulted, and what was done in response.

### Does filling in Form 10 satisfy the duty to notify the regulator?

No. Notifying the regulator of a notifiable incident is a separate legal duty with its own process and timing. The internal report is your record of the event; check the current notification requirements with SafeWork NSW for the incident in front of you.

### Should near misses be recorded?

Yes, where your system provides for it. A near miss is the same event without the injury, and recording it is what lets the control be fixed before the next one goes differently.

### Who completes the incident report?

Usually the supervisor or the person managing the site, with input from the person involved and any witnesses. The form records who completed it so the account has an author.

### How soon should the report be written?

As soon as the immediate response is done and people are safe. Detail degrades quickly, and an account written the same day is far more accurate than one reconstructed later in the week.