# Equipment (/docs/form-guides/nsw/electrical/nsw-ccew/equipment)



Tick what you actually installed or changed on this job. Only fill ratings and quantities for categories you worked on.

## Equipment installation tracking [#equipment-installation-tracking]

For each equipment type, check the installation box to indicate work was performed. This reveals additional fields for detailed specifications.

<Cards className="docs-cards docs-cards-cols-2 my-6">
  <Card title="Required information" icon="info">
    When equipment is marked as installed, provide **Rating** and **Number Installed** for compliance tracking.
  </Card>

  <Card title="Additional details" icon="info">
    Use **Particulars** field for specific equipment details, models, or special conditions.
  </Card>
</Cards>

## Equipment types [#equipment-types]

<Cards className="docs-cards docs-cards-cols-1 my-6">
  <Card title="Switchboard" icon="cpu">
    Main distribution boards, sub-boards, and meter panels. Include total amp rating, number of ways, and specify type (e.g., "TPN 250A Main Board", "Single Phase Sub-Board").
  </Card>

  <Card title="Circuits" icon="wrench">
    New circuit installations and modifications. Document circuit protection ratings, types, and note special circuits (RCD protected, RCBO, etc.).
  </Card>

  <Card title="Lighting systems" icon="info">
    All fixed lighting installations including LED downlights, fluorescent fittings, and exterior lighting. Include wattage and control methods (switches, dimmers, sensors).
  </Card>

  <Card title="Power outlets" icon="zap">
    General purpose outlets and dedicated circuits including standard GPOs, 15A outlets, and three-phase outlets. Note special requirements (weather protection, RCD protection).
  </Card>

  <Card title="Fixed appliances" icon="info">
    Hardwired electrical equipment such as hot water systems, air conditioning, and pool equipment. Include power ratings and connection types.
  </Card>

  <Card title="Generation equipment" icon="zap">
    Solar PV, wind, and micro-hydro systems. Include inverter ratings, AC output capacity, and specify grid connection or off-grid configuration.
  </Card>

  <Card title="Energy storage" icon="zap">
    Battery systems and backup power installations. Include battery capacity (kWh), inverter ratings, and integration with existing or new generation systems.
  </Card>
</Cards>

## Equipment specification details [#equipment-specification-details]

For each installed equipment type, provide:

### Rating information [#rating-information]

* **Electrical rating:** Voltage, current, and power specifications
* **Protection rating:** Circuit breaker or fuse sizes
* **Environmental rating:** IP ratings for outdoor installations

### Installation quantities [#installation-quantities]

* **Number Installed:** Total units or points installed

### Particulars and specifications [#particulars-and-specifications]

* **Manufacturer and model:** For critical equipment identification
* **Special features:** Smart controls, energy efficiency ratings
* **Environmental conditions:** Outdoor, wet area, hazardous location specifications

<Callout type="idea" className="docs-callout-info my-4">
  Include model numbers and specific ratings for major equipment like switchboards, inverters, and large appliances to assist with future maintenance and compliance verification.
</Callout>

<Callout type="info" className="docs-callout-info my-4">
  If you are unsure how to describe complex switchboard work, align wording with your job sheet and AS/NZS documentation.
</Callout>

<Card title="Meters section" icon="hugeicons:gauge" href="/docs/form-guides/nsw/electrical/nsw-ccew/meters">
  Meter installation and removal table.
</Card>