# NT Emergency Repairs CoC (/docs/form-guides/electrical/nt/nt-electrical-coc-emergency-after-hours-repairs)



The **NT Electrical Certificate of Compliance - Emergency After-Hours Repairs** is for electrical workers and contractors who completed emergency after-hours repairs and need to give a certificate to the network provider before reconnection.

Tradie Forms follows the official NT WorkSafe form order and maps your answers to the PDF layout.

<Callout type="warn" className="docs-callout-warn my-4">
  Use this supplementary certificate only for the emergency after-hours reconnection situation described by [NT WorkSafe](https://worksafe.nt.gov.au/electrical-safety/information-for-electrical-industry/certificate-of-compliance). Use the normal certificate process for other electrical work.
</Callout>

<span id="before-you-start" />

## Before you start [#before-you-start]

* Confirm the network provider needs this emergency after-hours certificate before reconnection.
* Check the current NT certificate process for the full job record.
* Read the notes on the official form before relying on the PDF for network reconnection or statutory requirements.
* Have customer contact details, the property address, repair details, and both worker and contractor licence details ready.

<span id="customer" />

## Customer [#customer]

Customer contact details and the property where the emergency repairs were completed.

* **Customer Name** - if a business, include the primary contact name.
* **Customer Phone** and **Customer Email** - contact details for the job.
* **Property** - use address search on Solo or Team for NT addresses, or type the street, suburb, state, and postcode manually.

<span id="propertyOwner" />

## Property Owner [#property-owner]

Complete this section if the property owner is known and different from the customer.

* **Property Owner Name**
* **Property Owner Email**

<span id="repairs" />

## Repairs [#repairs]

* **Repairs Completed Date** - when the emergency repairs were finished.
* **Description of Repairs** - describe the emergency electrical repairs undertaken.

<span id="defects" />

## Defects [#defects]

Answer whether any defects or non-compliances were observed on the existing installation that were not repaired.

* If **Yes**, include the standard and clause number in **Non-Compliance Details**.

<span id="electricalWorker" />

## Electrical Worker [#electrical-worker]

Certification by the electrical worker who carried out the examinations and tests.

* **Electrical Worker Name** and **Licence Number**
* **Signature** and **Date**

<span id="contractor" />

## Contractor [#contractor]

Certification by the contractor licence holder or authorised person acting on the contractor's behalf.

* **Contractor Licence Holder Name**, **Licence Number**, **Phone**, and **Email**
* **Signature** and **Date**

<span id="after-download" />

<span id="after-export" />

## After download [#after-download]

Before relying on the certificate:

* Check the customer, property, repair date, and repair description against the job record.
* Confirm any unrepaired defect or non-compliance is recorded with the relevant standard and clause.
* Check both licence numbers, signatures, and signature dates.
* Preview every page and make sure no text is cut off.
* Give the certificate to the network provider before reconnection where the emergency process requires it.
* Send the other required copies using the current NT certificate process, including the NT WorkSafe copy.
* Keep the contractor copy for at least **5 years**, in line with NT WorkSafe's current certificate guidance.

<Card title="Open the NT Emergency Repairs CoC" icon="hugeicons:play" href="/forms/nt-electrical-coc-emergency-after-hours-repairs">
  Start the certificate for an eligible emergency after-hours repair.
</Card>

<Callout type="warn" className="docs-callout-warn my-4">
  Tradie Forms prepares the PDF but does not send it to the network provider or NT WorkSafe. Check the current NT requirements before reconnection and distribution.
</Callout>