# Tester (/docs/form-guides/electrical/nsw/nsw-ccew/tester)



Who performed the safety tests. If that is you and you were also the installer, use **Same as installer** only when you genuinely did both roles on this job.

<Callout type="warn" className="docs-callout-warn my-4">
  The Tradie Forms CCEW is retired and direct eCert lodgement is not supported. Use these labels only to understand an existing draft, then complete the current CCEW in the BCNSW portal.
</Callout>

**Same as installer** copies installer contact, licence, and address. Check everything still matches before using it in eCert.

## NSW licence search (Solo) [#nsw-licence-search-solo]

Same as the installer section. On **Solo** or **Team**, tap **Search** on the licence area to query the **NSW trades licence register**.

1. Open **Tester**
2. Tap **Search**
3. Enter licence number or name and pick a result
4. Confirm details match the tester on site

If search fails, enter licence details manually.

## Tester contact information [#tester-contact-information]

<Cards className="docs-cards docs-cards-cols-2 my-6">
  <Card title="Required fields" icon="info">
    **First Name** and **Last Name**
  </Card>

  <Card title="Optional fields" icon="info">
    **Email**, **Mobile Number**, and **Office Number**
  </Card>
</Cards>

### Field descriptions [#field-descriptions]

* **First Name:** Tester's first name (required)
* **Last Name:** Tester's last name (required)
* **Email:** Email address
* **Mobile Number:** Mobile phone
* **Office Number:** Office phone

## Tester licence [#tester-licence]

<Cards className="docs-cards docs-cards-cols-2 my-6">
  <Card title="Required fields" icon="info">
    At least &#x2A;*Contractor's Licence No.** or &#x2A;*Qualified Supervisor's No.**, with the matching expiry
  </Card>

  <Card title="Optional fields" icon="info">
    The second licence set when it also applies
  </Card>
</Cards>

### Field descriptions [#field-descriptions-1]

* **Contractor's Licence No.:** Tester's contractor licence number
* **Licence Expiry:** Expiry date on the licence card
* **Qualified Supervisor's No.:** If applicable
* **Supervisor's Licence Expiry:** Supervisor expiry if applicable

## Tester address [#tester-address]

<Cards className="docs-cards docs-cards-cols-2 my-6">
  <Card title="Required fields" icon="info">
    Either **Street Number** or **Lot/RMB**, **Street Name**, **Suburb**, **State**, and **Post Code**
  </Card>

  <Card title="Optional fields" icon="info">
    **Floor**, **Unit**, and **Nearest Cross Street**
  </Card>
</Cards>

### Address fields [#address-fields]

Same format as the installer address: full street name, correct postcode, lot/RMB when there is no street number.

<Callout type="warn" className="docs-callout-warn my-4">
  Installation and testing carry different responsibilities. Only use **same as installer** when one person actually did both on site.
</Callout>

<Callout type="info" className="docs-callout-info my-4">
  The person who performed the safety and compliance tests must submit the CCEW as soon as possible and no later than seven days after completing them.
</Callout>

<Card title="Test report section" icon="hugeicons:activity" href="/docs/form-guides/electrical/nsw/nsw-ccew/test-report">
  Test date and electrical test results.
</Card>