# Installer (/docs/form-guides/electrical/nsw/nsw-ccew/installer)



The person who did the installation work. What you enter here should match the person responsible for the work on site.

<Callout type="warn" className="docs-callout-warn my-4">
  The Tradie Forms CCEW is retired and direct eCert lodgement is not supported. Use these labels only to understand an existing draft, then complete the current CCEW in the BCNSW portal.
</Callout>

## NSW licence search (Solo) [#nsw-licence-search-solo]

On **Solo** or **Team**, tap **Search** on the licence area to look up the **NSW trades licence register** and prefill licence fields.

1. Open the **Installer** section
2. Tap **Search**
3. Enter a licence number or name and pick a result
4. Check name and expiry match the person on site. The register can lag renewals

If search is down or returns nothing, type the details manually. Always verify the result before using it in eCert.

Save your details as a **saved detail** for the next job.

## Installer contact information [#installer-contact-information]

<Cards className="docs-cards docs-cards-cols-2 my-6">
  <Card title="Required fields" icon="info">
    **First Name** and **Last Name**
  </Card>

  <Card title="Optional fields" icon="info">
    **Email**, **Mobile Number**, and **Office Number**
  </Card>
</Cards>

### Field descriptions [#field-descriptions]

* **First Name:** Installer's first name (required)
* **Last Name:** Installer's last name (required)
* **Email:** Email address
* **Mobile Number:** Mobile phone
* **Office Number:** Office phone

## Installer licence [#installer-licence]

<Cards className="docs-cards docs-cards-cols-2 my-6">
  <Card title="Required fields" icon="info">
    At least &#x2A;*Contractor's Licence No.** or &#x2A;*Qualified Supervisor's No.**, with the matching expiry
  </Card>

  <Card title="Optional fields" icon="info">
    The second licence set when it also applies
  </Card>
</Cards>

### Field descriptions [#field-descriptions-1]

* **Contractor's Licence No.:** Your contractor licence number
* **Licence Expiry:** Expiry date on the licence card
* **Qualified Supervisor's No.:** If applicable
* **Supervisor's Licence Expiry:** Supervisor expiry if applicable

<Callout type="info" className="docs-callout-info my-4">
  You need at least **contractor licence** or **qualified supervisor** details for the section to complete.
</Callout>

## Installer address [#installer-address]

<Cards className="docs-cards docs-cards-cols-2 my-6">
  <Card title="Required fields" icon="info">
    Either **Street Number** or **Lot/RMB**, **Street Name**, **Suburb**, **State**, and **Post Code**
  </Card>

  <Card title="Optional fields" icon="info">
    **Floor**, **Unit**, and **Nearest Cross Street**
  </Card>
</Cards>

### Address fields [#address-fields]

* **Floor:** e.g. "Level 2" - leave blank if N/A
* **Unit:** Unit or apartment number - blank for standalone houses
* **Lot / RMB:** Lot or roadside mailbox for rural or new estates
* **Street Number:** e.g. "24" or "24A"
* **Street Name:** Full street name (use "Street", not "St")
* **Nearest Cross Street:** Helps locate rural or unclear addresses
* **Suburb:** e.g. "Parramatta"
* **State:** Usually NSW
* **Post Code:** 4-digit postcode - match the suburb

<Card title="Tester section" icon="hugeicons:flask-conical" href="/docs/form-guides/electrical/nsw/nsw-ccew/tester">
  Who performed testing. This may be the same person as installer.
</Card>